-
DG Sunmo 1.5V LR6 AM3 Alkaline AA Battery
This specification provides the technical requirements of alkaline manganese dioxide battery(LR6).The requirements and size should satisfy or above GB/T8897.1 and GB /T8897.2 if there is not any other detail requirements. -
DG Sunmo 1.5V LR14 AM2 Alkaline C Battery
Alkaline C battery nominal voltage is 1.5V. DG Sunmo Alkaline C batteries discharge time is 1100 minutes (-0.9V). Like the D battery, the C battery size has been standardized since the 1920s.
The C battery is called “14″ in current ANSI standards of battery nomenclature, and Alkaline C battery in IEC standards is designated “LR14″.
-
DG Sunmo 1.5V LR03 AM4 Alkaline AAA Battery
The Alkaline AAA battery (or LR03 battery) is a standard size of dry cell battery. One or more AAA batteries are commonly used in low-drain portable electronic devices. An alkaline battery in this size is designated by IEC as LR03, by ANSI C18.1 as 24, by old JIS standard as AM-4, and by other manufacturer and national standard designations that vary depending on the cell chemistry. The size was first introduced by The American Ever Ready Company in 1911.
-
DG Sunmo 1.5V LR20 AM1 Alkaline D Battery
ALKALINE D battery (D cell or IEC LR20) is a standardized size of a dry cell. A D cell is cylindrical with an electrical contact at each end; the positive end has a nub or bump. D cells are typically used in high current drain applications, such as in large flashlights, radio receivers, and transmitters, and other devices that require an extended running time.
-
DG Sunmo High quality 6LR61 9V Alkaline Battery
The 9-volt battery, is a common battery voltage. Batteries of various sizes and capacities are manufactured; a very common size is known as PP3, introduced for early transistor radios. The PP3 has a rectangular prism shape with rounded edges and a polarized snap connector at the top. This type is commonly used for many applications including household uses such as smoke and gas detectors, clocks, and toys.
