about-us1 (1)

Products

8 Years Exporter Professional Power Supply Leakage Proof AA Alkaline Dry Battery (Expert OEM Factory)

Short Description:

This specification provides the technical requirements of alkaline manganese dioxide battery(LR6).The requirements and size should satisfy or above GB/T8897.1 and GB /T8897.2 if there is not any other detail requirements.

Product Detail

Product Tags

As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for 8 Years Exporter Professional Power Supply Leakage Proof AA Alkaline Dry Battery (Expert OEM Factory), We welcome new and aged consumers from all walks of existence to get hold of us for future business interactions and mutual achievement!
As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for China Battery and Dry Battery price, Our products have been obtained more and more recognition from foreign clients, and established long term and cooperative relationship with them. We`ll provide the best service for every customer and sincerely welcome friends to work with us and establish the mutual benefit together.

TECH SPECS

1.Scope

1.1Reference Standards

GB/T8897.1 (IEC60086-1,MOD)(Primary Battery Part 1:General)

GB/T8897.2 (IEC60086-2,MOD)(Primary Battery Part2:Size and Technical requirements)

GB8897.5 (IEC 60086-5,IDT)(Primary Battery Part5:Safety of batteries with aqueous electrolyte)

1.2Environmental Protection Standard

The battery meets the standard of EU battery directives 2006/66/EC.

2.Chemical system, Voltage and Designation

Chemical system:Zn-MnO2(KOH),without Hg & Cr

Nominal Voltage: 1.5V

Designation : IEC:LR6     ANSI: AA     JIS:AM-3     Others:24A,E91

Operating Temp Range Spec of -20℃ to +60℃

3.Battery Size

Battery meets the picture standard

wuansl (1)

3.1 Inspection Tool

Using vernier calipers which precision is up 0.02mm. to avoid short-circuit, should paste on one insulation material on one end of the vernier calipers.

3.2 Acceptance Method

Using GB2828.1-2003 sampling program, special sampling S-3, acceptance quality limitation: AQL=1.0

Weight And Discharging Capacity

Battery weight about:22.0g

Discharging capacity:2200mAh(Loading43Ω,4h/day,20±2℃ RH60±15%,End-point   Voltage0.9V)

444

5. Open circuit voltage, loading voltage and short-circuit current

Project Open circuit Voltage(V) Loading Voltage(V) Short-circuit Voltage(A) Sampling Voltage
In 2 months
New battery
1.60 1.45 7.00 GB2828.1-2003 One Sampling, special sampling S-4,AQL=1.0
12 months storage in room temperature 1.56 1.40 6.00
Inspection Condition Loading 3.9Ω, loading time 0.3s,temp:20±2℃

6. Discharging Ability

Discharging Temp:20±2℃
Condition GB/T8897.2-2008
Requirements
Shortest Average Discharging Time
Load Discharging Way End-point Voltage 2 months new battery 12 months storage battery
43Ω 4h/d 0.9 V 65h 85h 78h
3.9Ω 1h/d 0.8 V 4.5h 6.5h 6h
24Ω 15s/min,8h/d 1.0 V 31h 40h 36h
3.9Ω 24h/d 0.9 V / 340min 310min
10Ω 24h/d 0.9 V / 17.5h 16h

Accordance of shortest discharging time

1. Testing 9 batteries of each discharging way;

2. The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement; no more than one battery has a service output less than 80% of the specified requirement;

3. The result of the average discharging time from each discharging standard shall be equal to or more than the average minimum time requirement, if one battery has a service output less than 80% of the specified requirement then take another 9 pieces to test again. This lot of batteries are qualified if     the result meets the NO.2 provision. If not qualified then will not test again.

7. Anti-leakage ability

Project Condition Requirements Qualified
Standard
Over Discharging Continuous discharging 48h in 20±2℃,humidity 60±15%,load 10Ω condition. No leakage by visual inspection N=9
Ac=0
Re=1
High-temp storage Storing in 60±2℃, relative humidity 90% condition for 20 days. N=30
Ac=1
Re=2

8. Safety Requirements

Project Condition Requirements Qualified Standard
External Short-circuit Using wire to connect positive and negative pole in 20±2℃ for 24h. No Explosion N=5
Ac=0
Re=1
Improper Equipment 4 batteries in series connection, one of them is in reverse connection. Leakage happened on the reversed battery or the shell temp reduce to room temp N=4×5
Ac=0
Re=1

Signs

The following signs are on the battery body:

1. Model: LR6/AA

2. Manufacturer and brand: Sunmol ®

3. Battery Poles: “+”and“-”

4. Expiry date or manufacturing date

5. Warnings.

Cautions For Using

1. This battery can’t be charged, leakage and explosion may happen when charging.

2. Make sure the battery is in correct position as + and -.

3. Short-circuit, heating, disposing of into fire or disassembling of battery is prohibited.

4. Battery can not be forced discharged, which leads to excess gassing and may result in bulging, leakage and de-crimping of cap.

5. New batteries and used ones can not be used at the same time. It is recommended to use the same brand when replacing batteries.

6. The battery should be taken out from the device which will not be used for a long time.

7. Exhausted battery should be taken out from the device.

8. Welding batteries are prohibited or it will cause damage.

9. The batteries should be kept from children, if swallowed, contact a doctor immediately.

11. Normal Package

Each 2,3 or 4 batteries in a shrink package,60 pieces in one inner box,12 boxes in one carton.

12. Storage and Expiry 

1. Batteries should be put in cool, dry and with air-flowing places

2. The batteries should not be exposed in sunshine or in raining places.

3. Do not mix the batteries which without labels

4. Storing in 20℃±2℃, 60%±15%RH condition. The storage time is 3 years.

13. Nominal discharging curve

Discharging condition: 20℃±2℃,RH60±15%

wuansl (2)As a result of ours specialty and service consciousness, our company has won a good reputation among customers all over the world for 8 Years Exporter Professional Power Supply Leakage Proof AA Alkaline Dry Battery (Expert OEM Factory), We welcome new and aged consumers from all walks of existence to get hold of us for future business interactions and mutual achievement!
8 Years Exporter China Battery and Dry Battery price, Our products have been obtained more and more recognition from foreign clients, and established long term and cooperative relationship with them. We`ll provide the best service for every customer and sincerely welcome friends to work with us and establish the mutual benefit together.


  • Previous:
  • Next:

  • Write your message here and send it to us